Viper 5301 - Basic Commands; Lock, Unlock, Remote Start, and AUX

6
© 2011 Directed Electronics. All rights reserved.
Basic commands
Lock
A U X
Command : Press one time to Lock
Feedback : Lock LED turns on with 1 beep.
Notes : Press/hold for 1.5 seconds to Lock the system and
then activate the Panic output*
Unlock
A U X
Command : Press one time to Unlock
Feedback : Unlock LED turns on and remote beeps twice.
Notes :
Remote
Start
A U X
Remote Start
Command : Press one time to activate Remote Start
Feedback : Remote Start LED turns on, remote start tones.
Notes :
AUX
AUX
Command : Press and hold for 1.5 seconds to activate the Trunk
Release.
Feedback : The AUX LED turns on and AUX activation tone
sounds.
Notes : This is an optional feature. See your authorized Di-
rected dealer for details.