7
© 2011 Directed Electronics. All rights reserved.
Function
shift
Function Shift
Command
: Press 1 to 4 times. ( See Function shift table.)
Feedback
: LED indicators turn on (according to the feature com-
mand)
Notes
: Each Press then release, shifts the function of the com-
mand button.
Feedback is available on the 2- way remote only.
*Horn honk is an optional feature. The panic and horn honk feature is avail-
able when this option is installed.
Pressing more than one button simultaneously generates an error tone and the
Function LED turns on, and all other LEDs flash.
To Next Page
Loading...
