Viper 5301 - Advanced Commands; Command Levels 1-4 Overview

8
© 2011 Directed Electronics. All rights reserved.
Advanced commands: function level 1
Silent lock
Command : Press
A U X
one- time and then press
A U X
.
Feedback: Lock LED turns on.
Notes : Locks the system without horn honks*
Silent unlock
Command : Press
A U X
one- time and then press
A U X
.
Feedback: Unlock LED turns on.
Notes : Unlocks the system without horn honks*
Runtime reset
Command : Press
A U X
one-time and then
A U X
.
Feedback: Remote start on tones sound, all LEDs light up to indicate start
time has been restored.
Notes : Re-starts the runtime counter if remote start is active. If the re-
mote start is not active, the 2- way remote responds with error
tone. (see page 23)
Aux 1
Command : Press
A U X
one time and then press AUX.
Feedback: The Aux LED turns on, activation tone sounds.
Notes : This is an optional feature. See your authorized Directed
dealerr for details.
Cabin temperature
Command : Press
A U X
one time, then Hold for 1.5 seconds .
Feedback: Cabin temperature is displayed on the remote.
Notes : LED lights turn on to indicate a range. (See page 28)
*Horn honk is an optional feature.