12
© 2011 Directed Electronics. All rights reserved.
Out of range notification
If a command is issued from the remote, but the remote is beyond the range
of the vehicle to receive the command, the remote will respond with an out-of
range notification. If this occurs, the transmit indicator on the remote flashes
rapidly, the key LED turns on, and the remote emits the error tone sounds.
Since conditions will vary in different areas (i.e.: Weather, RF interference, etc)
range may be affected and require you to be closer to the vehicle for success-
ful transmission.
System maintenance
The system requires no specific maintenance. The 2- way remote uses two
CR2016 cell batteries and the1- way remote uses one CR2032 cell battery.
When the battery begins to weaken, the operating range is reduced.
To Next Page
Loading...
