Viper 5301 - Advanced Commands: Function Level 3; Car Finder; Smart Start; Aux 3

10
© 2011 Directed Electronics. All rights reserved.
Advanced commands: function level 3
Car finder
Command : Press
A U X
three-times and then
A U X
.
Feedback: The remote emits 1 short beep, the vehicle emits 1 long horn
honk*, and the parking lights flash 10 times.
Notes : Lock/Unlock cancels the parking light flashes.
Smart start
Command : Press
A U X
three-times and then press
A U X
.
Feedback: Remote start LED turns on, with1 beep for enable or 2 beeps for
disable.
Notes : Enables or disables the Smart Start feature. (see page 27)
Aux 3
Command : Press
A U X
three times and then press AUX .
Feedback: The AUX LED turns on, Aux activation tone sounds
Notes : This is an optional feature. See your authorized Directed dealer
for details.
Runtime check
Command : Press
A U X
three times, and then Hold for 1.5 seconds.
Feedback: Remote start On tones sound.
Notes : Runtime remaining is displayed via LEDs. (See Page 23) If re-
mote start is not active the 2- way responds with an error tone.