VISICO VISICO2 - Flash Mode-TTL Auto Flash

Flash Mode-TTL Auto Flash
VISICO2 flash light is integrated with TTL communication function.
Mounting VC-818TX transmitter on camera, the camera and flash will
work together to release proper exposure. Whether shoot in scene
where ambient light varies, or shoot for fast moving events, you will
have proper exposure.
1) Set Flash light in TTL Mode
Shortly press [MODE] button, the
flash will set as <TTL>.
1/8-1/8+ 0 . 7
1/16-1/1 6 + 0 . 7
1/32-1/3 2 + 0 . 7
1/64-1/6 4 + 0 . 7
1/256-1/128 + 0 . 7
10Hz
15Hz
20Hz
25Hz
30Hz
20
20
20
20
20
Caution: To prevent flash damage from overheating, do not
continuously use stroboscopic flashes more than 10 times. After 10
times, please rest flash at least 15 minutes. If overheating protection
is active, flash will stop firing, please cool down flash for 30 minutes.
Output power
Max. Frequency
Max. number of
flashes
1/4
5Hz
20
11
Note:
Use stroboscopic flash in a dark environment is more effective.
Maximum output power of stroboscopic flash is 1/4 step.
To ensure shooting effect, you may use the formula below to calculate
the shutter speed and set it with the camera.
Shutter Speed=Number of Flashes / Flash Frequency