Safety Note
Do not use the unit in an environment where moisture or flammable
vapor is likely to come in contact with the unit.
Do not use in rain.
Do not explore any components in direct sun for a long time.
Do not restrict air vents while in use.
Do not use a unit with damaged covers, flash tubes, modeling lamps.
If the unit is dropped or damaged in any way, always have it checked
out before using it.
Do not place flammable materials close to either the flash tube or the
modeling lamp when the unit is in use.
Do not attempt to disassemble or service the unit on your own to
avoid shock hazard. Only flash tubes and batteries may be replaced
on your own.
Do not drop foreign objectives inside the housing. There is a risk of
electrical shock.
Always use a blower brush or clean facial tissue to remove dust and
moisture from the modeling lamp and the flash tube.
Always turn off the unit whenever mounting or dismounting
accessories.
Always turn off the unit and remove battery before maintenance.
Always keep out of reach of children.
Do not fire the flash directly into the eyes within short distances.
Otherwise visual impairment may occur.
Warning Sign
The manual is based on the assumption that both camera and flash light
are powered on.
This Caution symbol indicates a warning to avoid shooting problem.
Content of Carton
Your VISICO2 flash light should include the following items, please
check carefully.
1x VISICO2 Studio Flash (included Lithium battery)
1x Charger
1x Flash Holder
1x Protective bag
1x User manual
2
To Next Page
Loading...