1. Shortly press to Confirm channel
2. In Multi mode: Shortly press to set number
of flashes and flash frequency
3.Under MENU mode, Shortly press to select
Beep, Optical Mode, Auto Standby,
Constant Color Temperature Mode, Mask,
ID setting
Button
Operation
CH/GR
1. Shortly press to set group
2 . Press and hold 3 seconds to set channel
number
MODE
Modeling Lamp
Shortly press：Control modeling lamp OFF/
1/2/3/4/5/6
MENU
Shortly press：Enter or quit MENU mode
Long press: Restore Factory Settings
TEST
Shortly press to test flash
Select Dial
Shortly press to set parameter
Confirmation
Button
Shortly press to select flash mode M manual
flash,Multi stroboscopic flash, TTL auto flash
in sequence
5
To Next Page
Loading...