Vision Engineering EVO Cam - Operation; Quick Start and Basic Controls

OPERATION
www.visioneng.com/support
6
OPERATION
Quick start
u
Power on/off
v
Zoom in
w
Zoom out
x
Image capture
y
Transmitted substage illuminator (option)
z
Overview mode
{
Ringlight illumination control
|
Menu
Power on/off
u
- Short press = Power on
- Long press = Power off
Zoom control
v
- Zoom in
w
- Zoom out
Image capture
x
- Capture image
Transmitted substage illuminator (option)
y
- Press ‘+’ to increase brightness
- Press ‘–’ to decrease brightness
Overview mode
z
- Short press = Activate overview mode
(Press any button to exit overview mode)
Ring-light illumination control
{
- Press ‘+’ to increase brightness
- Press ‘–’ to decrease brightness
Menu
|
- Short press = Access camera menu
(Press
|
to exit menu)
M
u
v
w
x
y
z
{
|
Image brightness mode
|
- Long press to activate image brightness mode
v
- Press to increase image brightness
w
- Press to decrease image brightness
Activate auto white balance
z
+
|
- Short press together
Toggle frame rate (50fps/60fps)
From off, press and hold
u
+
z
until 4 quick beeps are
heard.
Reset factory defaults
From off, press and hold
u
+
|
until 4 quick beeps are
heard.