Vision Engineering EVO Cam - Table of Contents

OPERATION
Quick start 6
Control functions 7
Illumination control 7
Image capture 7
Magnication 8
Magnication level OSD (On Screen Display) 8
Overview 8
Brightness 8
Factory defaults 9
Auto-white balance 9
Main menu options 9
Using the control console (optional) 11
Changing the camera objective lens 11
MAINTENANCE
Troubleshooting 12
Changing the output frame rate 12
Taking care of your evo cam 12
FIRMWARE UPGRADE
Firmware upgrade 13
Lighting controller rmware update 13
SPECIFICATION
SERVICING
Service record 15
WARRANTY
PREFACE
System serial numbers ii
EVO Cam ii
Multi-axis stand ii
Ergo stand ii
Focus assembly iii
Transmitted substage illumination module (option)
iii
Copyright iv
Disclaimer iv
General vi
Safety vi
Cleaning vi
Servicing vi
Symbols used vi
Warning! vi
Warning of electrical shock hazard vi
Important information vi
Health & safety vi
Electrical safety vi
Illumination safety vi
Environmental considerations vi
Operator wellbeing vi
Compliance statements vi
SYSTEM DIAGRAM
Sub-assemblies 1
Optical data 1
Stand options 2
Transmitted substage illuminator (option) 3
Stand mounts 4
Ergo stand 4
Multi-axis stand 4
Objective lens 5
Cabling 5