Vision MAX Pro User Manual

Example Jobs 117
© 2015 Vision Engraving Systems
Cutting
After sending the engrave file to the machine, the Filter by Color window will re-appear, signaling that
the software is ready for you to send another file to the engraver. Since we need to change the material
setting, select Stop Cutting.
To change to the material setting for cutting, select Engrave from the top toolbar menu, then Tool
Options.
Select Engravers Plastic(Cutting) from the Material drop down list, then select OK.

Vision MAX Pro Specifications

General

Brand	Vision
Model	MAX Pro
Category	Engraver
Language	English