Vision MAX Pro User Manual

Software Installation and Connections 33
© 2015 Vision Engraving Systems
The installation will continue.
Select your machine from the Manufacturer list on the left side of this window by clicking in the box to
the left of the machine (or machine series) you own. The right side of the window will list a selection of
Output Devices. Only put a check mark in the box(es) to the left of the Output Device(s) you own. Then
select Next. If you purchase another engraving system from Vision, it can be added to the machine list
at a later date from within the Vision software.

Vision MAX Pro Specifications

General

Brand	Vision
Model	MAX Pro
Category	Engraver
Language	English