Vision MAX Pro User Manual

Vision Max Pro User Manual98
© 2015 Vision Engraving Systems
Adjust the number of plates to 1, leave spacing at 0.000 inches, width and height to 2.500 and 1.25
inches, set the left margin to 0.175 inches and the top margin to 0.200 inches as shown, then click on
Apply. Note that the page margins on the toolbar are located such that the top field is for the top margin,
the left field is the left margin, etc.
The screen should then appear as below.
Select the Text Compose Icon.

Vision MAX Pro Specifications

General

Brand	Vision
Model	MAX Pro
Category	Engraver
Language	English