57
Appendix B
Configuring the DVR for connection over LAN/WAN IP
Address
The DVR must be assigned a static IP address to allow it to connect over a LAN/WAN environment.
As multiple networking environments are present in today’s systems assistance should be gathered
from your networking technician.
To Assign a static IP address:
Right click on “My Network Places” on the desktop and select properties. Locate the “Local Area
Move down Connection” Icon and right click on it to select “properties”. Select “Internet Protocol
TCP/IP” and select properties. Select “Use the following IP address” and enter the information
provided by your network technician.
The DVR will communicate over the assigned IP address using port 8080. The network
configuration must allow the connection on pont 8080 for the connection to function correctly.
To Next Page
Loading...