Visiosat VISIODATA User Manual

Mode d'emploi / User manual / Manual de Usuario / Bedienungsanleitung
Réf : 0 144330
GND
+
Test
(-30 dB)
UHF3 UHF2
B I-II B III VHF-UHF UHF1
1 23 4567 89 10
Amplificateurs sélectifs UHF / UHF Clusters
DATA
Sortie / Output
18V 800 mA
24V
Station terrestre programmable
18V 800 mA
Gain manuel
Entrée DATA
Quitter
Répartition UHF
Canal de fin
Canal de départ
Sélection entrée
Gain auto
Exit
DATA Import
Auto level
Manual level Stop channel
Start channel
Select filter
Split UHF
Digital terrestrial head end
24V 24V 24V
470-862 MHz
G: 55 dB
Att. 30 dB
470-862 MHz
G: 55 dB
Att. 30 dB
470-862 MHz
G: 55 dB
Att. 30 dB
47-240 + 470-862 MHz
G: 40 dB
Att. 20 dB
174-240 MHz
G: 40 dB
Att. 20 dB
47-108 MHz
G: 35 dB
Att. 20 dB
REF : 0 144330
Station terrestre programmable
Digital Terrestrial Head end
Estación terrestre programableES
GB
F
3
19
35
Programmierbarer terrestrischer Head endD
52
NOUVELLES FONCTIONS
- Verrouillage de la centrale par code de sécurité
- Possibilité de désactiver l'amplificateur 20 dB sur chaque entrée UHF
pour la réception des signaux forts jusqu'à 105 dBμV
NEW FEATURES
- Unit can be locked by security code
- High UHF input levels up to 105 dBμV by switchable 20 dB input amplifier
NUEVAS FUNCIONES
- La unidad puede ser bloqueada mediante código de seguridad
- Amplificador de 20 dB conmutable en cada entrada de UHF para
permitir altos niveles hasta 105 dBμV
NEUE EIGENSCHAFTEN
- Verstärker kann blockiert werden mit einer Sicherheitskode
- Schaltliger 20 dB Verstärker auf jeden UHF Eingang zur erlaubung
höhere Eingangssignale bis zum 105 dBμV

Visiosat VISIODATA Specifications

General

Brand	Visiosat
Model	VISIODATA
Category	Amplifier
Language	English

Summary

Key Product Features

Security Code Lock Feature

Unit can be locked by security code.

Switchable 20 dB UHF Input Amplifier

High UHF input levels up to 105 dBμV via switchable 20 dB amplifier.

Settings Copy Functionality

Copy function to transfer all settlements from one unit to another.

Automatic Signal Level Adjustment

Automatic leveling of signal or manual with 30 dB attenuator.

Test Output Specification

-30 dB Test output.

Device Hardware Description

Programming Mode Operation

Entering Programming Mode

Steps to enter the programming mode using rotary/push button.

Security Code Activation Procedure

Procedure when security code is activated for programming.

Parameter and Mode Management

Setting Operational Parameters

Procedure to select and set parameters using rotary/push button.

Exiting Programming Mode

Steps to exit programming mode, with options for free access or security code.

UHF Input Amplifier Control

Disabling the 20 dB UHF Amplifier

Procedure to switch off the 20 dB amplifier on UHF inputs.

Application Network Examples

VHF-UHF Network Configuration

Diagram illustrating a VHF-UHF network setup.

VISIOdistri System Setup

Diagram illustrating a VISIOdistri system setup.

Cluster Configuration

Assigning Clusters to UHF Inputs

Defines the 3 possible configurations for UHF input clusters.

Configuring Cluster Channels

Procedure to set channel bandwidth (1-7 channels) for each cluster.

Cluster Channel Setting Guidelines

Notes on single channel mode, park function, and overlapping clusters.

Verifying Cluster Channel Settings

Procedure to check the set channels for each cluster.

Signal Level Management

Automatic UHF Level Setting

Automatic equalization of signal levels for UHF clusters.

Cluster Equalization Status Indicators

LED indicators for cluster equalization status (parked, weak, strong).

General UHF Output Level Adjustment

Adjusting the general UHF signal level after automatic setting.

Manual UHF Level Setting

Entering manual level setting mode for general adjustments.

Input and Cluster Manual Leveling

Manually setting the level for inputs (BI-II, BIII, V-U) and clusters.

Data Transfer Functionality

Slave to Master Data Import

Function to transmit all settings from one unit to another (slave to master).

System Reset Procedure

Resetting All Device Settings

Resets all settings of clusters and attenuators to zero.

Technical Specifications

System Block Diagram