Vislink InCam-HG User Manual

Template Operators Manual
FocalPoint Camera Control
Issue No: 1 Page: 42
Ref: INHG-ASUM-70XX Copyright © 2020 IMT and Vislink are Vislink Technologies Inc. companies
SETUP> RETURN DATA SETUP> Baud Rate
• Sets the baud rate required for Manufacturer.
o 115200 is the baud rate used for Grass Valley
o 9600 is the baud rate used for Generic (Transparent)
SETUP> RETURN DATA SETUP> Parity
• Sets Return Data Parity
Default to ‘No Parity’
SETUP> Shutter 1/60
• Enable or Disable Shutter range if available in camera
Only required when using OCP Type – Gigawave OCP5
SETUP> Shutter 1/100
• Enable or Disable Shutter range if available in camera
Only required when using OCP Type – Gigawave OCP5
CAMERA CONTROL> Channel
• Select RF Channel, Manual or Preset
CAMERA CONTROL> Scan Mode
• Enables or Disables Scan Mode
CAMERA CONTROL> FREQUENCY
• Set Manual and Preset RF frequencies

Vislink InCam-HG Specifications

General

Brand	Vislink
Model	InCam-HG
Category	Transmitter
Language	English