Vitec Multimedia MGW Ace Decoder OG User Manual

MGW Ace Decoder OG
User Manual, Version 2.0 30
For Zixi Pull channel:
Parameter Description
Channel Name
(Optional)
Enter a Channel Name to differentiate channels within the Channel list.
Channel name is optional.
Ethernet Port Select the Ethernet Port from which the channel is received.
Streaming
Protocol
Select Zixi Pull.
IP Address Type the Zixi server IP address.
Port Type the Zixi server port.
Stream Name Type the channel name entered in Zixi server.
Password
(Optional)
Type the password if required.
Latency Type the latency value to be used
For Zixi Point-to-point channel:
Parameter Description
Channel
Name
(Optional)
Enter a Channel Name to differentiate channels within the Channel list.
Channel name is optional.
Ethernet Port Select the Ethernet Port from which the channel is received.
Streaming
Protocol
Select Zixi P2P.
Port Type the Channel port.
Zixi point-to-point streaming with MGW Ace Encoder
 Zixi Point-to-point license isincluded when MGW Ace Decoder OG isused in conjunction with VITEC encoders.
 To start using point-to-point Zixistreaming between MGW Ace Decoder OG and MGW Ace Encoder:
 Verifythat MGW Ace Encoder and MGW Ace Decoder OG can communicate (the gateways are properlyconfigured).
 Set Zixiasthe protocol on both MGW Ace Decoder OG (Zixi P2P) and MGW Ace Encoder (Zixi).
 Set the MGW Ace Encoder Target Address byentering MGW Ace Decoder OG card IP address (Zixi isunicast
address only).
 Set the same target port on both MGW Ace Decoder OG and MGW Ace Encoder.
 Start the MGW Ace Decoder OG by clicking Play.

Vitec Multimedia MGW Ace Decoder OG Specifications

General

Brand	Vitec Multimedia
Model	MGW Ace Decoder OG
Category	Media Converter
Language	English