vividtouch VTF-6510 - Page 39

39
NOTE Default settings appear in bold type.
Figure 4-1. OSD Menu Structure
Main Menu
SubMenu
Value
OSD Settings
Horizontal
0~100
Vertical
0~100
Transparency
Off; 1~4
OSD Timeout
5s; 10s; 20s; 30s; 60s
OSD Rotation
(VTF-6510 only)
Portrait; Landscape
Language
English, French, German, Dutch, Hungarian, Slovenian, Serbian,
Croatian, Danish
Splash Screen
On; Off
Setup
Auto Adjustment
H.Position
0~100
V.Position
0~100
Phase
0~100
Clock
0~100
Zoom
10 steps
Power LED
On; Off
Real Time Clock
User Mode; Workday Mode; Everyday Mode
Adv. Setup
Smart Light Control
Off; DCR; Light Sensor
IRFM
On; Off
MEMC
(VTF-6510 only)
Off; Low; Medium; High
Noise Reduction
Off; Low; Medium; High
Wake Up From Sleep
VGA Only; Digital, RS232. Ethernet; Never Sleep
DP Ver.
1.1; 1.2
EDID Setup
HDMI: 4K2K/1080P; DP: 4K2K/1080P
Touch Control
Auto; OPS; USB Touch 1; USB Touch 2; PC
Firmware Update
Factory Reset
Communication
RS232 Baud Rate
115200; 38400; 19200; 9600
Enable Network
Yes; No
IP Address Settings
Please refer to Communication Menu section for details
Power Status Alert
Yes; No
Source Status Alert
Yes; No
Signal Lost Alert
Yes; No
Load Default
Yes; No
Device MAC
Shows the MAC address of the device
Information
(Timing info)
Shows the name of input source
PC Power Status
Shows the power status of PC
Firmware Version
Shows the firmware version of the monitor
SubMCU Version
Shows the firmware version of the monitor
Serial Number
Shows the Serial Number of the monitor