vividtouch VTF-6510 - 4 Operation; Using the On-Screen Menus

38
4. Operation
Using the On-Screen Menus
To display the on-screen menus, press MENU on the remote control (Figure 2-3) or built-in keypad (Figure 2-1).
To select a sub-menu, use the and buttons to highlight it. Then, press to enter that sub-menu.
To select a menu item, use the and buttons to highlight it. Then, press or to adjust that setting and press
ENTER .
The OSD menus are arranged hierarchically, as shown in Figure 4-1. Depending on the selected input source and
signal characteristics, some menu options may not be available.
Main Menu
SubMenu
Value
Input
Main Input
VGA; DisplayPort; HDMI1; HDMI2; HDMI3; HDMI4; OPS; Front
HDMI; PC
AutoScan
Off; Main; PxP; All
PiP Mode Off; PiP; PbP; 3Window; 4Window
Sub1 Input
VGA; DisplayPort; HDMI1; HDMI2; HDMI3; HDMI4; OPS; Front
HDMI; PC
Sub2 Input
(same as above)
Sub3 Input (same as above)
PiP Size
Small; Mid; Large
PiP Position TopR; TopL; BotR; BotL
Swap
Picture
Picture Format
Main
: Full Screen/Letterbox/ 4:3/1:1;
Scheme
User, Vivid, Cinema, Game, Sport
Contrast
0, 1, 2, ....,
50
, ....100
Brightness
0, 1, 2, ...., 50, ....100
Sharpness
0, 1, 2, ....,
50
, ....100
Hue
0, 1, 2, ...., 50, ....100
Saturation
0, 1, 2, ....,
50
, ....100
Backlight
0, 1, 2, ...., 50, ...., 80, ....100
Colour Temp &
Gamma
5000K; 6500K; 7500K; 9300K; User; off; 2.2
HDMI RGB Range
Auto; Full; Limited
Audio
Volume
0~100
Treble
-6~6
Bass
-6~6
Balance
-6~6
Internal Speaker
On; Off
Audio Source
Line-In ; DisplayPort ; HDMI1 ; HDMI2 ; HDMI3 ; HDMI4 ; OPS;
Front HDMI; PC