Need help?Do you have a question about the Vivint Element CT200 and is the answer not in the manual?
Details the physical layout and terminal connections of the thermostat unit.
Provides guidance on choosing an optimal location for mounting the thermostat.
Steps for safely preparing and labeling wires before connection.
Instructions for securing the thermostat's mounting plate to the wall.
Procedures for connecting the thermostat wires to the terminal block.
Information on powering the thermostat, including battery and C-wire options.
Steps to connect the thermostat to a Z-Wave network for smart control.
Setting up HVAC types, heat types, and cooling types for proper operation.
Performing heating and cooling tests to verify correct installation.
Visual guides for various common HVAC wiring configurations.
Sequential instructions for wiring common HVAC configurations.
A guide to identify the function of different thermostat wires.
Introduction to the thermostat, its screens, and user interface navigation.
Understanding the main display and how to adjust temperature settings.
Adjusting display units, behavior, and humidity targets.
Configuring equipment, comfort parameters, and network connections.
Information on low battery, network status, and firmware updates.
General| Type | Smart Thermostat |
|---|---|
| Connectivity | Z-Wave |
| Features | Energy Reports |
| Operating Temperature | 32°F to 104°F |
| Dimensions | 4.5 x 4.5 x 1 inches |
| Remote Control | Yes, via app |
| Scheduling | Yes |
| Energy Saving Features | energy reports |
| Geofencing | Yes |
| Voice Control | Amazon Alexa, Google Assistant |
| Power Source | Hardwired (24V C-wire) or Battery (AA lithium) |
| Operating Humidity | 5% - 95% (non-condensing) |
To Next Page
