GRAY 10
• Use for light blemish inspection including bright (stuck ON) pixels.
• Confirm there are no more than four visible blemishes brighter than Gray10.
• No blemish greater than one inch or 2.54cm in length/diameter is allowed.
• Confirm there are no stuck ON (bright) pixels brighter than Gray10.
• Confirm there are no flickering pixels.
• No more than one bright pixel is allowed in the Pond of Mirrors.
WHITE
• Use for lumens and uniformity measurements, banding adjustment and
inspection of dark (stuck OFF) pixels, minor blemishes.
• Confirm there are no more than six total of light and dark blemishes
• Confirm no blemish is greater than five inches in length/diameter.
• Confirm there are no more than four stuck off pixels.
• Verify no banding.
To Next Page
Loading...
