VivoLink VLHDMICTL1-MME - Relay Control Setting

18G In-line HDMI Controller with Auto Display Control
15
GIROFFINT.
Report the two times sending interval
time of IR OFF.
IR OFF SEND DELAY TIME 2S!
6.1.6 Relay Control Setting
Command
Function
Feedback Example
RELAY1COT:[XXX].
Set the Relay 1 delay time to XXX
(default 10s, range of 3S to 180s).
RELAY1COT:010.
SET RELAY 1 TIME DELAY TIME
10S!
RELAY2COT:[XXX].
Set the Relay 2 delay time to XXX
(default 10s, range of 3S to 180s).
RELAY2COT:010.
SET RELAY 2 TIME DELAY TIME
10S!
GRELAY1COT.
Report Relay 1 delay time.
RELAY 1 TIME DELAY TIME 10S!
GRELAY2COT.
Report Relay 2 delay time.
RELAY 2 TIME DELAY TIME 10S!
Relay Port Definition
When the controller start SYSTEM ON, the Relay 1 port will perform the below actions:
1) The NO connection closes, and NC connection opens.
2) When the delay time is up, the NO connection opens, and NC connection closes.
When the controller start SYSTEM OFF, the Relay 2 port will perform the below
actions:
1) The NO connection closes, and NC connection opens.
2) When the delay time is up, the NO connection opens, and NC connection closes.
NO C NC
Relay 1
Relay 2
NO C NC