VivoLink VLHDMICTL1-MME - HDCP Mode

18G In-line HDMI Controller with Auto Display Control
8
5.2 HDCP Mode
Put switch 4 on “ON” position to select HDCP Active mode, or to “OFF” for HDCP
Passive mode.
Switch Status
Mode
HDCP
OFF (0)
Passive
(Default)
Automatically follows the HDCP version of source device.
ON (1)
Active
 If the input video has HDCP content, the HDCP version of HDMI
output is HDCP 1.4 for broader video solution.
 If the input video has no HDCP content, the HDMI output has no
HDCP either.