VivoLink VLHDMICTL1-MME - 1 Product Introduction; Features; Package List

18G In-line HDMI Controller with Auto Display Control
1
1. Product Introduction
Thanks for choosing the VLHDMICTL1-MME 18G In-line HDMI Controller, which is
designed for automatic system control and HDMI signal extension in small meeting
rooms and huddle spaces. The controller supports three system trigger methods, IR
signal, video signal (5V or TMDS). It automatically triggers CEC commands,
pre-loaded RS232 and IR commands to turn on or off display, and relay control to rise
and fall the projection screen. It supports video resolution up to 4K@60Hz 4:4:4 HDR
10 and Dolby Vision, and features 4K to 1080P down-scaling for compatibility with
1080P display. Besides passing EDID information from the display, there are multiple
built-in EDID settings can be selected by the 4-pin DIP switch on the front panel. In
addition, the controller supports CEC pass-through, RS232 control, IR learning and
relay control.
1.1 Features
 Supports up to 4Kx2K@60Hz 4:4:4 HDR10 and Dolby Vision, HDCP 2.2 compliant.
 HDCP pass-through or converted to HDCP 1.4 for better compatibility.
 Supports 4K to1080P down-scaling.
 Comprehensive EDID management with 8 EDID Options for various application.
 Automation display control via CEC, RS232 and IR.
 Contact Closure input for connections with a variety of devices, such as sensor and
switch.
 Relay control for device like projection screen.
 Built-in signal equalizer, provides capability to use longer range HDMI cable.
1.2 Package List
 1x 18G In-line HDMI Controller
 2x Mounting Ears with 4 Screws
 4x Plastic Cushions
 3x 3-pin Terminal Blocks
 1x RS232 Cable (3-pin to DB9)
 1x Power Adapter (5V DC 1A)
 1x User Manual
Note: Please contact your distributor immediately if any damage or defect in the
components is found.