VIVOTEK - A Leading Provider of Multimedia Communication Solutions
User's Manual - 25
Advanced mode
Each function on the configuration list will be explained in the following sections. Those
functions that only show in Advanced mode are marked with
Advanced mode
. If you want to set
up advanced functions, please click
[Advanced mode] on the bottom of the configuration list to
quickly switch to Advanced mode.
System
This section explains how to configure the basic settings for the Network Camera, such as the
host name and system time. It is composed of the following three columns: System, System
Time and DI and DO. When completed with the settings on this page, click Save on the page
bottom to take effect.
System
Host name: Enter a desired name for the Network Camera. The text will be displayed at the top of the
main page.
Turn off the LED indicators: If you don’t want to let others know that the network camera is working, you
can select this option to turn off the LED indicators.
Click to switch to Basic mode
Firmware Version
Configuration list
To Next Page
Loading...
Need help?
General
