VIVOTEK - A Leading Provider of Multimedia Communication Solutions
68 - User's Manual
System log
Advanced mode
This section explains how to configure the Network Camera to send system log to the remote
server as a backup.
Remote Log
You can configure the Network Camera to send the system log file to a remote server as a log backup.
Before utilizing this feature, it is suggested to install a log-recording tool to receive system log messages
from the Network Camera. For example, a tool -- Kiwi Syslog Daemon. Visit
http://www.kiwisyslog.com/
kiwi-syslog-daemon-overview/
.
Follow the steps below to set up the remote log:
1. In the IP address text box, enter the IP address of the remote server.
2. In the port text box, enter the port number of the remote server.
3. When completed, select Enable remote log and click Save to take effect.
Current Log
This column displays the system’s log in chronological order. The system log is stored in the Network
Camera’s buffer area and will be overwritten when reaching a certain amount.
To Next Page
Loading...
