Vivotek FD7132 - Page 94

VIVOTEK - A Leading Provider of Multimedia Communication Solutions
94 - User's Manual
Group: upnppresentation
NAME VALUE DEFAULT SECURITY
(get/set)
DESCRIPTION
enable <boolean> 1 6/6 Enable or disable the
UPNP presentation
service.
Group: upnpportforwarding
NAME VALUE DEFAULT SECURITY
(get/set)
DESCRIPTION
enable <boolean> 0 6/6 Enable or disable the UPNP
port forwarding service.
upnpnatstatus 0~3 0 6/7 The status of UpnP port
forwarding, used internally.
0 is OK, 1 is FAIL, 2 is no IGD
router, 3 is no need to do
port forwarding.
Group: syslog
NAME VALUE DEFAULT SECURITY
(get/set)
DESCRIPTION
enableremotelog <boolean> 0 6/6 enable remote log
serverip <IP address> <blank> 6/6 Log server IP address
serverport 514,
1025~65535
514 6/6 Server port used for log
level 0~7 6 6/6 The levels to distinguish the
importance of information.
0: LOG_EMERG
1: LOG_ALERT
2: LOG_CRIT
3: LOG_ERR
4: LOG_WARNING
5: LOG_NOTICE
6: LOG_INFO
7: LOG_DEBUG
Group: capability
NAME VALUE DEFAULT SECURITY
(get/set)
DESCRIPTION