Vivotek FD7132 - Page 98

VIVOTEK - A Leading Provider of Multimedia Communication Solutions
98 - User's Manual
wireless_encrypt
_wep
<boolean> <product
dependent>
0/7 Indicate whether to
support the wireless WEP
wireless_encrypt
_wpa
<boolean> <product
dependent>
0/7 Indicate whether to
support the wireless WPA
wireless_encrypt
_wpa2
<boolean> <product
dependent>
0/7 Indicate whether to
support the wireless WPA2
Group: event_i<0~2>
PARAMETER VALUE Default SECURITY
(get/set)
DESCRIPTION
name string[40] NULL 6/6 The identification of this
entry
enable 0, 1 0 6/6 To enable or disable this
event.
priority 0, 1, 2 1 6/6 Indicate the priority of this
event.
“0” indicates low priority.
“1” indicates normal
priority.
“2” indicates high priority.
delay 1~999 10 6/6 Delay seconds before detect
next event.
trigger boot,
di,
motion,
seq
boot 6/6 Indicate the trigger
condition.
“boot” indicates system
boot.
“di” indicates digital input or
PIR
“motion” indicates video
motion detection.
“seq” indicates periodic
condition.
di <integer> 0 6/6 Indicate which di detected.
This field is required when
trigger condition is “di”.
One bit represents one
digital input. The LSB
indicates DI 0.