Video
This section explains how to congure the video settings of the Network Camera.
Video Settings
Video title: Enter a name that will be displayed on the title bar of the live video�
Color: Select to display color or black/white video streams�
Power line frequency: Set the power line frequency consistent with local utility settings to eliminate image
flickering associated with fluorescent lights� Note that after the power line frequency is changed, you
must disconnect and reconnect the power cord of the Network Camera in order for the new setting to
take effect�
Select caching stream: This Network Camera supports time shift cache stream on the Network Camera�
Select one stream and check the below option Enable time shift caching stream�
Enable time shift caching stream
Advanced Mode
: Check this item to enable the time shift cache
stream on the Network Camera, which will stores video in the camera’s embedded memory for a period
of time depending on the cache memory of each Network Camera� This function can work seamlessly
with VIVOTEK’s recording software� When an event occurs, the recording software can request time shift
cache stream from the camera, which allows the user to get an earlier video data�
Video orientation: Flip--vertically reect the display of the live video; Mirror--horizontally reect the display
of the live video. Select both options if the Network Camera is installed upside-down (ex. on the ceiling)
to correct the image orientation. Please note that the preset locations will be cleared after ip/mirror.
To Next Page
Loading...
Need help?
General
