Vivotek FD8133 - Installation 5; Hardware Installation

VIVOTEK
User's Manual - 5
Installation
Hardware Installation
First, follow the instructions below to remove the dome cover�
Then remove the black cocer as shown below�
Dome Cover
Tilt Adjustment Screw
Record the MAC address before
installing the camera�
Network Camera
Model No: FD8134
Made in Taiwan
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Pat. 6,930,709
RoHS
V I
MAC:0002D107258A