Vivotek FD8161 - Page 128

VIVOTEK
128 - User's Manual
DynInterfree,
PeanutHull,
CustomSafe100
DynInterfree =>dyn-interfree.it
PeanutHull => PeanutHull
CustomSafe100 =>
Custom server using safe100 method
<provider>_hostname string[128] 6/6 Your dynamic hostname.
<provider>_usernam
eemail
string[64] 6/6 Your user or email to login to the DDNS service
provider
<provider>_password
key
string[64] 6/6 Your password or key to login to the DDNS
service provider.
<provider>_serverna
me
string[128] 6/6 The server name for safe100.
(This field only exists if the provider is
customsafe100)
Group: upnppresentation
NAME VALUE SECURITY
(get/set)
DESCRIPTION
enable <boolean> 6/6 Enable or disable the UPNP presentation service.
Group: upnpportforwarding
NAME VALUE SECURITY
(get/set)
DESCRIPTION
enable <boolean> 6/6 Enable or disable the UPNP port forwarding service.
upnpnatstatus 0~3 6/7 The status of UpnP port forwarding, used internally.
0 = OK, 1 = FAIL, 2 = no IGD router, 3 = no need for
port forwarding
Group: syslog
NAME VALUE SECURITY
(get/set)
DESCRIPTION
enableremotelog <boolean> 6/6 Enable remote log.
serverip <IP address> 6/6 Log server IP address.
serverport 514, 1025~65535 6/6 Server port used for log.
level 0~7 6/6 Levels used to distinguish the importance of the
information:
0: LOG_EMERG
1: LOG_ALERT
2: LOG_CRIT
3: LOG_ERR
4: LOG_WARNING