Vivotek FD8162 - Page 122

VIVOTEK
122 - User's Manual
7.5 security
Group: security
NAME VALUE SECURITY
(get/set)
DESCRIPTION
privilege_do
<product dependent>
view, operator,
admin
6/6 Indicate which privileges and above can
control digital output
(capability.ndo > 0)
privilege_camctrl
<product dependent>
view, operator,
admin
6/6 Indicate which privileges and above can
control PTZ
(capability.ptzenabled > 0 or capability.eptz >
0)
user_i0_name string[64] 6/7 User name of root
user_i<1~20>_name string[64] 6/7 User name
user_i0_pass password[64] 6/6 Root password
user_i<1~20>_pass password[64] 7/6 User password
user_i0_privilege viewer,
operator,
admin
6/7 Root privilege
user_i<1~20>_
privilege
viewer,
operator,
admin
6/6 User privilege
7.6 network
Group: network
NAME VALUE SECURITY
(get/set)
DESCRIPTION
preproces
s
<positive
integer>
7/6 An 32-bit integer, each bit can be set separately as follows:
Bit 0 => HTTP service;
Bit 1=> HTTPS service;
Bit 2=> FTP service;
Bit 3 => Two way audio and RTSP Streaming service;
To stop service before changing its port settings. It’s recommended
to set this parameter when change a service port to the port
occupied by another service currently. Otherwise, the service may
fail.
Stopped service will auto-start after changing port settings.
Ex: