Vivotek FD8162 - Page 148

VIVOTEK
148 - User's Manual
nvideosetting <positive
integer>
0/7 Number of video settings per channel.
naudiosetting <positive
integer>
0/7 Number of audio settings per channel.
nuart 0,
<positive
integer>
0/7 Number of UART interfaces.
nvideoinprofile <positive
integer>
0/7 Number of video input profiles.
nmotionprofile 0, <positive
integer>
0/7 Number of motion profiles.
ptzenabled 0, <positive
integer>
0/7 An 32-bit integer, each bit can be set separately
as follows:
Bit 0 => Support camera control function;
0(not support), 1(support)
Bit 1 => Built-in or external camera;
0(external), 1(built-in)
Bit 2 => Support pan operation, 0(not support),
1(support)
Bit 3 => Support tilt operation; 0(not support),
1(support)
Bit 4 => Support zoom operation;
0(not support), 1(support)
Bit 5 => Support focus operation;
0(not support), 1(support)
Bit 6 => Support iris operation;
0(not support), 1(support)
Bit 7 => External or built-in PT; 0(built-in),
1(external)
Bit 8 => Invalidate bit 1 ~ 7;
0(bit 1 ~ 7 are valid),
1(bit 1 ~ 7 are invalid)
Bit 9 => Reserved bit; Invalidate lens_pan,
Lens_tilt, lens_zoon, lens_focus, len_iris.
0(fields are valid),
1(fields are invalid)
evctrlchannel <boolean> 0/7 Indicate whether to support HTTP tunnel for
event/control transfer.
joystick <boolean> 0/7 Indicate whether to support joystick control.