EasyManua.ls Logo

Vivotek FD8162 - Page 159

Vivotek FD8162
181 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
VIVOTEK
User's Manual - 159
weekday 0~127 6/6 Indicate which weekday is scheduled.
One bit represents one weekday.
bit0 (LSB) = Saturday
bit1 = Friday
bit2 = Thursday
bit3 = Wednesday
bit4 = Tuesday
bit5 = Monday
bit6 = Sunday
For example, to detect events on Friday and
Sunday, set weekday as 66.
begintime hh:mm 6/6 Start time of the weekly schedule.
endtime hh:mm 6/6 End time of the weekly schedule.
(00:00~24:00 indicates schedule always on)
prefix string[16] 6/6 Indicate the prefix of the filename.
cyclesize 200~ 6/6 The maximum size for cycle recording in Kbytes
when choosing to limit recording size.
(not used in FD8162)
reserveamount 0~ 6/6 The reserved amount in Mbytes when choosing
cyclic recording mechanism.
dest cf,
0~4
6/6 The destination to store the recorded data.
“cf means local storage (CF or SD card).
“0” means the index of the network storage.
cffolder string[128] 6/6 Folder name.
adaptive_enable
<product dependent>
0,1 6/6 Indicate whether the adaptive recording is enabled
adaptive_preevent
<product dependent>
0~9 6/6 Indicate when is the adaptive recording started
before the event trigger point (seconds)
adaptive_postevent
<product dependent>
0~10 6/6 Indicate when is the adaptive recording stopped
after the event trigger point (seconds)
7.34 HTTPS
Group: https (capability.protocol.https > 0)
NAME VALUE SECURITY
(get/set)
DESCRIPTION
enable <boolean> 6/6 To enable or disable secure HTTP.
policy <Boolean> 6/6 If the value is 1, it will force HTTP connection
redirect to HTTPS connection
method auto,
manual,
install
6/6 auto => Create self-signed certificate
automatically.
manual => Create self-signed certificate
manually.
install => Create certificate request and install.
status -3 ~ 1 6/7 Specify the https status.
-3 = Certificate not installed
-2 = Invalid public key
-1 = Waiting for certificate
0 = Not installed
1 = Active
countryname string[2] 6/6 Country name in the certificate information.
stateorprovincename string[128] 6/6 State or province name in the certificate
information.
localityname string[128] 6/6 The locality name in the certificate information.
organizationname string[64] 6/6 Organization name in the certificate information.
unit string[32] 6/6 Organizational unit name in the certificate
information.
commonname string[64] 6/6 Common name in the certificate information.
validdays 0 ~ 3650 6/6 Valid period for the certification.
7.35 Storage management setting
Currently it’s for local storage (SD, CF card)
Group: disk_i<0~(n-1)> n is the total number of storage devices. (capability.storage.dbenabled > 0)
PARAMETER VALUE SECURITY
(get/set)
DESCRIPTION
cyclic_enabled <boolean> 6/6 Enable cyclic storage method.

Table of Contents

Other manuals for Vivotek FD8162

Related product manuals