Vivotek FD8162 - Page 43

VIVOTEK
User's Manual - 43
3� The following information will show up in a pop-up window after clicking Create� Then click Save to
generate the certicate.
4. The Certicate Information will automatically be displayed in the third column as shown below. You
can click Property to see detailed information about the certicate.
5� Check Enable HTTPS secure connection, then select a connection option: “HTTP & HTTPS” or
“HTTPS only”� Click Save to enable the settings�
Create certificate and install : Select this option if you want to create a certicate from a certicate
authority�
1� Select the third option�
2� Click Create to open the Create Certicate page, then click Save to generate the certicate.