Vogel & Plötscher R Series - EC Declaration of Conformity

Operating Manual R-Series | Version 2.2 | 15.09.2020
© 2012 by Vogel & Plötscher GmbH & Co. KG Page: 14 / 21
5. EC Declaration of Conformity
as per Annex II A of the Machinery Directive (98/37/EC)
The manufacturer:
Vogel & Plötscher GmbH + Co. KG
Geldermannstrasse 4
79206 Breisach
hereby declares that the
measuring devices described here of the type
RA | RCA | RCS | RCFF
comply with the following applicable
requirements:
Applied harmonised standards:
98/37/EC, Annex I
DIN EN ISO 12100-2, date: 2004
DIN EN 1050, date: 1997
Any design modifications which affect the technical data specified in the Operation
Manual or the designated use – that is to say, which materially alter the measuring device
– shall render this Declaration of Conformity invalid!
Breisach, 02.02.2021
__________________ _____________________________
Place, date Signature of CEO