Operating Manual R-Series | Version 2.2 | 15.09.2020
© 2012 by Vogel & Plötscher GmbH & Co. KG Page: 2 / 21
Table of contents
1. General
2. Commissioning
2.1 Device description
2.2 Preparation
2.3 Calibrating the spirit level
3. Operation | Measurement
3.1 Measuring track gauge
3.2 Measuring flangeway clearance
3.3 Measuring check rail gauge
3.4 Measuring back-to-back distance
3.5 Measuring cant
4. Options
4.1 Option –T (separation)
4.2 Option –P (blade inspection adapter)
4.3 Option –H (crossing tip inclination)
4.4 Option –ZB (cogwheel operation)
4.5 Option –R20 (flangeway 20 mm)
4.6 Option –W (interchangeable bolt)
4.7 Option –RH (check rail height)
5. EC Declaration of Conformity
6. Technical data
7. Care and maintenance
7.1 Maintenance
7.2 Care
7.3 Contact details
To Next Page
Loading...
Need help?
General