Operating Manual R-Series | Version 2.2 | 15.09.2020
© 2012 by Vogel & Plötscher GmbH & Co. KG Page: 21 / 21
7. Care and maintenance
7.1 Care
After every use the measuring device must be cleaned, dried and stored in a dry room.
7.2 Maintenance
The measuring device must be inspected and calibrated at regular intervals (usually every 12 months)
at the manufacturer's facility or by a qualified and authorised body.
7.3 Contact details
If you have any questions or problems relating to the measuring device, please contact your local
Vogel & Plötscher distributor, or contact us directly:
Vogel & Plötscher GmbH
Geldermannstrasse 4
D-79206 Breisach
Tel: + 49 (0)7667 9461 00
Fax: + 49 (0)7667 9461 20
E-mail: info@voploe.de
Web: www.vogelundploetscher.de
Note
The company and brand names used in this document are generally protected by trademark or patent
law.
All technical data provided in this manual was acquired, collated and verified with the greatest care
and diligence. Since the possibility of error cannot be entirely ruled out, however, we hereby advise
that we provide no guarantee as to the accuracy of the technical data, nor will we accept any legal
responsibility or liability of any kind for the consequences of any incorrect data or information given.
Vogel & Plötscher GmbH & Co. KG reserves the right to make changes to this manual. Any such
changes are made for the sole purposes of ongoing technical development.
To Previous Page
Loading...
Need help?
General