Figure 2.1: Safe handling positions diagram
(as indicated in red)
Page 5UG10519-2.0 - Air Motion User Guide V2.0
All Void Acoustics products are carefully manufactured and thoroughly tested before being
despatched. Your dealer will ensure that your Void products are in pristine condition before
being forwarded to you but mistakes and accidents can happen.
Before signing for your delivery:
• Inspect your shipment for any signs of contamination, abuse or transit damage as soon
as you receive it
• Check your Void Acoustics delivery fully against your order
• If your shipment is incomplete or any of its contents are found to be damaged; inform
the shipping company and inform your dealer.
Air Motion loudspeakers are heavy (35.4 kg/78 lbs) and require a minimum two people to lift.
• Undo the four butterfly catches on the transport case then remove the lid making sure
the lid is clear before moving sideways
• If you need to place the Air Motion on a flat
surface ensure you use a lint free product to
protect the finish
• To remove from the transport case, each person
should hold the Air Motion on each side, with
one hand on the edge of the horn flare, and the
other supporting the weight of the drivers to the
rear, as shown in figure 2.1
• When removing the Air Motion take care not to
damage the lower tray of the transport case.
Keep the original packaging in case you need to
return a product for service later.
See section 1.5 for warranty conditions and see
section 6 if your product needs servicing.
2 Unpacking and Checking
To Next Page
Loading...
