Need help?Do you have a question about the Void Digidrive V2 and is the answer not in the manual?
Explains how to connect the Digidrive V2 to audio sources and amplifiers.
Guides users through the initial setup and configuration of the Digidrive V2.
Explains how to select input and output channels for control.
Describes parameters and controls available for each input channel.
Details parameters and controls available for each output channel.
Covers system-wide settings like loading, saving, and access level.
Lists the minimum hardware and software requirements for Live Link.
Provides step-by-step instructions for installing the Live Link software.
Details how to connect the Digidrive V2 to a PC via USB or Ethernet.
Explains how to launch the Live Link software on Windows and Mac.
Covers initial steps and navigating the Live Link software interface.
Details the mixing window for inputs/outputs, faders, mute, and link functions.
Explains the crossover tab, including HPF/LPF settings and filter types.
Details EQ, Limiter, Gain, LPF/HPF, and delay controls for inputs A-D.
Details EQ, Limiter, Delay, LPF/HPF, Polarity, Gain for outputs 1-6.
Provides instructions on how to upgrade the device firmware.
Explains how to obtain service and prepare the unit for repair.
Instructions for filling out and returning the warranty registration form.
Information regarding product disposal and compliance with environmental directives.
To Next Page
General
