Digidrive V2
User Manual
31
11.0……………………………………………………………………….Service
This unit has very sophisticated circuitry and should only be
serviced by a fully trained technician.
No user serviceable parts inside
Refer servicing to a qualified technician
11.1…………………………………………………Worldwide Service
Service may be obtained from your local authorised service centre.
To obtain service, simply present your sales receipt as proof of
purchase along with the defective unit to an authorised service
centre. They will handle the necessary paperwork and repair.
Remember to transport your unit in the original factory packaging.
1. When sending a Digidrive V2 to an authorised service
centre for service, please write a detailed description of
the fault and list any other equipment used in
conjunction with the faulty product. Send the fault
description with the faulty product, do not send it
separately.
2. Ensure safe transportation of your unit to the authorised
service centre. Ship it in the original factory packaging if
possible.
3. Do not ship the unit in any kind of rack. Ignoring this
warning may result in extensive damage to the unit and
the equipment rack. Accessories are not needed. Do
not send the instruction manual, cables or any other
hardware.
4. Before returning your faulty product for repair, please
remember to get a return authorisation number from
the dealer whom you purchased your product from.
Failure to do so could delay the repair of your product.
To Next Page
Loading...
Need help?
General
