4.Advanced User Guidebook
USB disk Requirements
Support USB disk format: USB 2.0 or below, FAT16 or FAT32, allocation unit size
no exceed 4k, max capacity 64G. If the USB disk doesn't work properly, format
your USB disk and then try again. There are two methods in format the USB disk,
first by using computer system to format, the other one is through formatting
software to format. (8G or above USB disk can only use the second method to
format, that is through formatting software to format.)
Use system-provided function to format the USB disk
1. Connect the USB disk to the computer.
2.
Right click Computer- Manage to enter Computer Management interface.
3. Click Disk Management menu, and information about the USB disk will display
on the right side with red mark 1 and 2.
Figure 4- 2: Disk Management of computer
4. Right click 1 or 2 red mark area, choose Format. And system will pop up a
warning message, click Yes.
Figure 4- 3: Format the USB disk warning
5. Set File System as FAT32, Allocation unit size 4096. Check "Perform a quick
format" to execute a quick format. Click OK, and then click Yes on the warning
To Next Page
Loading...
