VOLTCRAFT DSO4000B Series User Manual

Digital Storage Oscilloscope 60
Chapter 3 Waveform Generator
The series oscilloscope is equipped with waveform generator function, with one
channel of arbitrary waveform output. User can edit the arbitrary waveform or choose
the regular waveforms such as Sine, Ramp, Square, Trapezia, DC, Exponent, AM/FM.
Push the Wave Gen button to display the DDS Menu.
Generate the Sine waveform
To output a Sine Wave, please do the following steps:
1. Press F1 button to select "Sine".
2. Set the Wave Parameter:
Frequency: Set the output wave frequency.
Amplitude: Set the output wave amplitude.
Offset: Set the output wave vertical level offset.
Generate the Ramp waveform
To output a Ramp Wave, please do the following steps:
1. Press F1 button, then turn the Universal Knob to select "Ramp".
2. Set the Wave Parameter:
Frequency: Set the output wave frequency.
Amplitude: Set the output wave amplitude.
Offset: Set the output wave vertical level offset.
Generate the Square waveform
To output a Square Wave, please do the following Step:
1. Press F1 button, then turn the Universal Knob to select "Square".
2. Set the Wave Parameter:
Frequency: Set the output wave frequency.
Amplitude: Set the output wave amplitude.

VOLTCRAFT DSO4000B Series Specifications

General

Brand	VOLTCRAFT
Model	DSO4000B Series
Category	Test Equipment
Language	English