42
MODE Use this button to switch between different measurement functions
OL Overload indicator; the measuring range was exceeded
Battery data symbol
Diode test function
Acoustic continuity test
AC Alternating current symbol
DC Direct current symbol
COM Connection for reference potential
V Voltage mode (Volt = unit of electrical voltage)
A Current mode (Ampere = unit of electric current)
Hz% Frequency mode (Hertz = unit of frequency) and pulse duration ratio in %
Ω Resistance mode (Ohm = unit of electrical resistance)
CAP Capacity measurement function
TEMP Temperature measurement function
LPF Low pass lter for ltering high-frequency interference during AC-V measurements
Position marker for the conductor to ensure the correct current measurement.
Button for switching the measurement light on and off
To Next Page
Loading...
