23
• The unauthorized conversion and/or modication of the product is inadmissible for safety and approval reasons (CE).
• The product is not a toy. Children cannot judge the dangers involved when handling electrical devices.
• If the product is brought from a cold into a warm room (e.g. in transport), it is possible that condensation develops.
Therefore, allow the product to reach room temperature before operating it.
• Operate the product only via the included battery or another equal model (9 V E-block). Replace empty batteries by
new ones to avoid damage from incorrect measured values.
• Regular batteries must not be recharged. There is a danger of explosion if the battery is used improperly or inserted
into the pitot tube anemometer. The included battery must only be replaced by a battery of the same type or an equal
product. Never subject the battery to high temperatures.
• In commercial institutions, the accident prevention regulations of the Employer’s Liability Insurance Association for
Electrical Systems and Operating Materials are to be observed.
• Do not leave packaging material unattended. It may become a dangerous toy for children.
• Handle the product with care. It can be damaged by impact, blows or when dropped even from a low height.
• Please observe that the thresholds in the specications must never be undercut or exceeded for the measured values.
To Next Page
Loading...
Need help?
General
