Presentation
5
Presentation
Volvo A35E/A35E FS 6×6 is a three-axle, sprung hauler with
articulated frame steering and a load capacity of 33.5 tonnes
(36.9 sh tons) or 20.5 m
3
(26.8 yd3).
Volvo A40E/A40E FS 6×6 is a three-axle, sprung hauler with
articulated frame steering and a load capacity of 39 tonnes
(43.0 sh tons) or 24 m
3
(31.4 yd3).
All machines have 4-wheel drive with 6-wheel drive, which can be
engaged and disengaged.
Intended use
The machine is intended to be used under normal conditions for
the applications described in the Operator's Manual. If it is used for
other purposes or in potentially dangerous environments, for
example explosive atmosphere, flammable environment or areas
with dust containing asbestos, etc., special safety regulations must
be followed and the machine be equipped for such use. Contact
the manufacturer/dealer for further information.
Environmental requirements
Bear the environment in mind during all operation, and when
servicing and maintaining the machine. Always follow local and
national environmental legislation that apply to all handling of the
machine.
Engine
The machine is equipped with a straight, six-cylinder, four-stroke,
diesel engine. The engine is a direct-injection, turbocharged low-
emission engine with intercooler.
Electrical system
The machine has four control units (ECUs). The I-ECU (for the
instrumentation) is integrated with the display unit, warning lamps
and instruments and provides the operator with information via
these. The V-ECU (for the machine) receives signals from sensors
on the machine and these are sent to the I-ECU. The T-ECU
controls the transmission. The E-ECU controls the engine.
Machines with Full Suspension have one further V-ECU.
1031100
To Next Page
Loading...
Need help?
General
