Operating instructions
Stopping machine 69
Stopping machine
1 Release the accelerator pedal.
2 Brake and put the gear selector control in neutral, when the
machine is stationary.
3 Apply the parking brake.
4 Let the engine run at idle speed for at least 1/2 minute before it
is stopped to ensure lubrication and cooling of the
turbocharger.
5 Turn the ignition key to position 0 (turned off).
WARNING!
When you are entering and leaving the machine, always
face the machine and use the steps or hand holds to avoid
slipping. Always use the "three-point" grip, i.e. both hands
and one foot or both feet and one hand, when entering or
leaving. Do not jump!
To Next Page
Loading...
Need help?
General
