Safety when servicing
Before service, read 91
Q Never adjust a reducing valve to a higher pressure than what is
recommended by the manufacturer.
Q Machines, which are used within a contaminated or in any other
way unhealthy area, must be equipped for such work. Special
safety regulations apply when servicing such a machine.
Q When installing two-way radio, mobile telephone or similar
equipment, the installation must be carried out according to the
instructions from the manufacturer in order to eliminate
interference with the electronic system and components
intended for the function of the machine, see page 10.
Q Measures during electric welding, see page 124.
Q Make sure that all covers on the machine are in position before
starting the engine and putting the machine to work.
Prevent environmental influence
Be conscious of the environment when carrying out service and
maintenance. Oil and other liquids dangerous to the environment
and released into the environment will cause damage. Oil
degrades very slowly in water and sediment. One litre of oil can
destroy millions of litres of drinking water.
NOTE! In common for all points below is that all waste is to be
handed over to a treatment and disposal firm approved by the
authorities.
Q When draining, oils and liquids must be collected in suitable
vessels and steps taken to avoid spillage.
Q Used filters must be drained of all liquid before they are passed
on as waste. Used filters from machines which work in
environments with asbestos or other dangerous dust, must be
placed in the bag supplied with the new filter.
Q Batteries contain substances dangerous to the environment
and health. Used batteries must therefore be handled as waste
dangerous to the environment.
Q Consumables, e.g. used rags, gloves and bottles may also be
contaminated with oils and liquids dangerous to the
environment and must in that case be treated as waste
dangerous to the environment.
To Next Page
Loading...
Need help?
General
