Maintenance
Electrical system 93
Fuses
Note:
When actuating the button (arrow) all fuses in the electric circuits
directly supplied by the battery (terminal 30) are checked.
Fuse: F7, F8, F9, F19, F22, F24, function LEDs must light up.
When the ignition is s witched on (ignition key in position "1") all
fuses of the consumers working during the day are checked.
Fuse: F1, F10, F11, F13, F14, F15, F16, F17, F18, F20, F21, F27,
function LEDs must light.
When actuating the light switch to position "1" = fender lights and
dashboard illumination, the fuses F4, F5, F12, F25, F26 are
checked. Function LEDs must light up .
When actuating the light switch to position "2" = travel light, the
fuses F2 and F3 are checked. With full headlights switched on the
fuses F23 and F6 are checked. Function LEDs must light up.
F1 10 A Engine shut down
F2 7.5 A Dimmed headlight, left
F3 7.5 A Dimmed headlight, right
F4 7.5 A Fender light, left
F5 7.5 A Fender light, right
F6 7.5 A Full headlight, right – full headlight control
F7 20 A Heating blower
F8 10 A Socket, 1-pole
F9 10 A Flashing beacon
F10 15 A Seat heating
F11 7.5 A Radio terminal 15
F12 7,5 A Dashboard illumination
F13 15 A Road s weeping machine
F14 10 A Direction indicators, tank sensor , warning
buzzer
F15 15 A Additional valve
F16 10 A Travel system
F17 10 A Differential lock, hydr. change-ov er valve
F18 10 A Brake light, float position, preheating control
F19 10 A Hazard light/flasher
F20 10 A Wiper – washing, rear
F21 10 A Wiper – washing, front
F22 7.5 A Interior light, radio terminal 30
F23 7.5 A Headlights
F24 15 A Light switch input terminal 30
F25 15 A Working headlights, front
F26 15 A Working headlights, rear
F27 20 A Light switch input terminal 15
To Next Page
