Maintenance
62 Brake system
Brake system
The brake system consists of the ser vice brake and the parking
brake system.
All maintenance and repair work must only be carried out in
official service centres.
Inspection of brake linings
Brake linings must be checked for wear every 500 operating
hours.
Inspection of parking b rake
– Apply the parking brake.
– Start the engine. Raising the working attachment (transport
position).
– Preselect (forward/backw ard travel) "neutral position".
With the travel system switched off and an empty bucket the
parking brake must be able to hold the machine on a 20%
slope.
ATTENTION!
The parki ng brake must only be checked in a specially
secured location. Make sure that there are no persons or
obstructions in the vicinity of the machine
To Next Page
